Download Quantum Plus Operator`s Manual

Transcript
Reinstallation/Moving
You can reinstall Quantum Plus, or move the program to another computer if you
have a backup of the database information available.
Quantum Plus will first prompt you to specify the serial ports to be used to connect
to your programming devices:
These settings can be changed later; for installation, the important setting is the KPU
port.
Next, Quantum Plus asks you for information on your database setup. Select the
appropriate configuration.
Next, Quantum Plus asks for the type of installation you will be performing:
92 • Appendix B - Installing Quantum Plus
Quantum Plus Operator’s Manual