Download 1771-5.16, BASIC Module EEPROM Memory Module, Installation

Installation Instructions
EEPROM Memory Module
Install the Memory Module
Follow these instructions to install your memory module.
1.
Remove the BASIC module from the I/O chassis.
2.
Disassemble the BASIC module to gain access to the memory
module sockets.
ATTENTION: Electrostatic discharge can damage integrated
circuits or semiconductors in the module of you touch
backplane connector pins. Wear a wrist-strap grounding device
and use a static-safe workstation, if available.
SKT1
20371-M
2
3.
Insert the memory module into SKT1.
4.
Reassemble the BASIC module.