Download User`s Guide

Transcript
Additional printer setup
17
2 Lightly press the stop on the left side of the access door, and then slide the access door to remove.
1
2
3
3 Unpack the ISP kit.
Note: Make sure to remove and discard the small cable attached to the white connector.
1
6
2
3
5
4
1
ISP solution
2
Screw to attach the ISP solution to the plastic bracket
3
ISP exterior cover
4
Screws to attach the ISP solution to the ISP exterior cover
5
Plastic bracket
6
Long ISP cable