Download VMT-1 Valve Maintenance Trailer

Chapter 3, Introduction to the Equipment: Standard VMT-1 Equipment
A 3” flex hose is provided with the vacuum system. The
hose is coiled and stored on the front of the trailer, as shown
in Figure 3-10.
Figure 3-10. The vacuum hose is rolled up and stored
on the front of the trailer.
Various sized vacuum wands are available for the vacuum
system (see Figure 3-12). All wands have a standard connector for the 3” suction hose. Wand diameters are as follows:
•
•
•
•
7/8”
1”
1 1/4”
1 1/2”
•
•
•
•
2”
2 1/4”
2 1/2”
3”
Figure 3-11. Various sized vacuum wands are available. All wands are fitted to the 3” vacuum hose.
E.H. Wachs
Part No. 77-MAN-21, Rev. 1-0809
21