Download View - Rice Lake Weighing Systems

Board
3. By inserting board to the far end, it is
locked by the lock piece inside.
Lock piece
4. Connect suitable interface cable (must
be purchased separately) to printer connector and to serial port of your computer. Be sure to tighten screws on both
ends of cable to keep it in place.
Important! Make sure that you do not
have a parallel cable connected to the
printer when you’re using the serial interface. You can switch to the parallel interface without removing the serial board, but
only one cable can be attached at a time.
When the serial interface is installed, the
“Serial I/F” portion of the Menu will become active (see page 71).
ML320/321 Turbo Printer Handbook
109