Download Proceedings book
Transcript
for read out via I²C communication. Spray control The microcontroller is connected to the webcam computer via serial connection. The microcontroller reads the coordinates of the golf ball via this connection and calculates the correction for the servos, so the spray nozzle is pointed at the golf ball. The servos are controlled by a 50 Hz PWM signal which is generated with a timer. Conclusion We have build a robot on a very low budget and this helped us to be very creative in the design of the robot. We had to build our robot from cheap parts or parts we could get for free. We managed to build a solid robot still with a lot of strengths and little weaknesses. The strengths of our robot are the 4'wheel drive and 4'wheel steering, they give the robot a combination of high traction with tight steering. We also keep the navigation simple which makes it robust and allows the robot to drive relatively fast. We also have a strong power supply consisting of two 12 volts lead acid battery combined with a switching regulator we can go quite far on one set of battery's. Due to overpowering the motors the robot can reach pretty high speeds. Our weaknesses are that we might be a little unprepared for bad weather. Due to our low budget we didn't manage to get a better camera for ball detection than a standard webcam which is build to work inside and not outside. Overall we made better progress than expected and we didn't lose too much time in doing unnecessary complicated stuff. And we managed to get equipment from several companies which really helped us out. 22