Download PART ONE LCCR

The diagram chart contextual menu
4.5.6.1
Zoom out
Functions that changes the visible part of the time scale: it doubles it so that
the time scale is enlarged.
4.5.6.2
View all range
Functions that shows the time scale from 21:00 PM the day before the
regulation, until 03:00 AM the day after the regulation.
4.5.6.3
Show/hide lines
Function that shows or hides the lined marks on the chart.
4.5.6.4
Show/hide legend
Function that shows or hide the legend of the chart diagram.
4.5.6.5
Show/hide layers
Function that shows or hide the graphical layers on the chart diagram in
regulation view. When active, LCCR displays in different colours the
regulated profiles, according to the delay of the flight plans. Three different
layers are displayed. The first one displays the regulated profile due to the
flight plans having a delay greater or equal than limit_layer2; the
second one displays the regulated profile due to the flight plans having a
delay greater or equal than limit_layer1 and strictly less than
limit_layer2; the last layer shows the whole regulated profile.
Remember that the two parameters are settable through the LCCR settings
panel (<File.LCCR settings> function, see LCCR settings: <Alt+L>).
4.5.6.6
Capacity view
Function that only displays the capacity profiles. The view mode is capacity.
4.5.6.7
Load View
Function that only displays the load profiles. The view mode is load.
88