Download 1084-100 C1 ACMS man..

Index
AC 1-4, 5-5
AC board, 1-4, 5-5
AC centering
advisability of, 4-5
comparison with DC centering, 4-3, 4-5
in immediate mode, procedures for, 4-7−4-8
operating modes, 4-4
plot, example of, 4-7
process, 4-6, 4-7
in sequence mode, procedures for, 4-8
warning messages, A-3
AC excitation modes, 6-6
AC, field amplitude, 4-16
ACMS control center
measurement command buttons, 6-6
overview, 6-1
status bar, 6-2
tabs, 6-2−6-6
ACMS insert
adjusting keyed interface, 5-2
function, 1-1, 5-2. See also Detection coils; Drive coil
illustration, 1-3, 5-2
installing
in PPMS, 2-1, 2-2
sample in, 3-4
warming, 4-16
removing, 2-5
storing, 5-2
AcmsLog file, 6-7
ACMS measurement data files
adding comment to, 6-9
automatically saving sequence data, 4-16
changing during sequence run, 6-9−6-10
creating, 6-8
opening graph view, 6-2
sample property data, displayed in Properties tab, 6-4
saving data to, 4-4, 6-2, 6-7
selected, identified in Datafile tab, 6-2, 6-7
ACMS option
activating, 2-4
calibrating, 5-1
data files. See Data files
electronics, 1-4
hardware, 5-1. See also AC board; ACMS insert;
ACMS sample holder; ACMS sample transport;
Cables; Servo controller
installing, 2-1−2-4
maximum temperature, 1-2
measurements. See AC susceptibility measurements;
DC magnetization measurements
Quantum Design
overview, 1-1
probe magnetics, 1-2−1-3
removing, 2-5
safety precautions, 1-5−1-6
sample centering. See AC centering; DC centering
software, overview of, 6-1. See also ACMS control
center; ACMS measurement data files; ACMS raw
measurement data files; ACMS status log
ACMS raw measurement data files
creating, 6-8
saving data to, 6-2, 6-7
selected, identified in Datafile tab, 6-2
ACMS sample holder
function, 5-4
maintenance, 5-4
mounting sample on, 3-1, 3-2
ACMS sample transport
controlling movement of, 4-10, 5-3, 6-5
disconnecting from software, 5-3, 6-5
function, 5-3
installing, 2-1, 2-2−2-3
maintenance, 5-3
removing, 2-5
testing
manually, 4-10, 5-3, 6-5
when ACMS is activated, 6-6
ACMS status log, 6-7
ACMS view tree, 4-15
AC susceptibility measurements
centering sample prior to taking, 4-11
comparison with DC measurements, 4-3
creating calibration file for, 6-5
error messages, A-1, A-4
in immediate mode, procedures for, 4-11−4-13
measure modes, 4-12
multiple, taking in sequence, 4-13−4-16
operating modes, 4-4
plot, example of, 4-13
process, 4-1, 4-2. See also ACMS option: Probe
magnetics
reviewing results in ACMS status log, 6-7
in sequence mode, procedures for, 4-17−4-19
time, 4-16
warning messages, A-1, A-4
Advanced tab, 6-5
Amplitude spacing modes, 4-14
Autorange mode, 4-12, 4-15,4-18-4-19
PPMS ACMS User’s Manual
Index-1