Download Windows Access Server User` s Manual - Foxit

If you want to remove the previously configured remote port forwarding, type
"fwdremote <local port>". This command will drop this port from the schemed port
forwarding list.
"PRINT" ---- WAC Client Side Printing
Choose an actual printer for WAC Client Printing. At the command screen, type "Help
Print" would display you a list of print assistance.
Syntax:
Print
Print <printer number>
Print 0
Where:
x Print ---- to display available printers and current printer. The printer preceded by
wild card (*) is the current printer.
x Print <printer number> ----- to choose a printer. WAC Client lists your available
printers by numeric figure, so to choose a printer, you are asked to choose the number
before the printer.
x Print 0 ---- Disable the printing on this client. Here "0" is zero.
"QUIT" ---- Quit the Client Program
Simply quit the WACTERM or WACSSH application and disconnect from the server.
Syntax:
QUIT
This QUIT command is same to Close button in the window border, will broke the WAC
Session and all applications you are current running will be aborted, it's possible that
some data of those running applications got lost during the quit process, so it's
recommended that you don't use QUIT command, instead, go into the WAC session, quit
the running application, and type "EXIT" at the command prompt.
Tip:
Page 143 of 231