Download 40014/4040B DDS Function Generator - User`s Manual

Transcript
SWEep
This command activates or deactivates sweep:
Arguments
Type:
Boolean
Command Type: Setting or Query
Setting
Syntax:
SWE<ws>ON|OFF|LIN|LOG
Examples: SWE ON
SWE LIN
Query
Syntax:
SWE?
Response:
OFF|LIN ON|LIN OFF|LOG ON|LOG OFF
Note: Sweep will automatically be active if set to Linear or Logarithmic.
SWRAte
This command sets the time for one complete sweep:
Arguments
Type:
Numeric
Units:
S, mS, uS, nS
Range:
10mS to 100S
Command Type: Setting or Query
Setting
Syntax:
SWRAte<ws><time>[units]
SWRAte<ws>MINimum|MAXimum
Examples:
SWRAte 50MS
Query
Syntax:
SWRAte?[<ws>MINimum|MAXimum]
Response:
NR3
SWSTArt
This command sets the start frequency of the sweep:
Arguments
Type:
Numeric.
Units:
MHz, KHz, Hz (default)
Range:
Dependent on the frequency range of the current function.
Command Type: Setting or Query
Setting
Syntax:
SWSTArt<ws><frequency>[units]
46