Download User Manual - Syncom Technologies

As you click one column turning into blue, please wait and the window below will
appear to allow users configure multi-stream.
After loading camera’s information, users can modify camera parameter, except this
camera is be added by video wall decoder.

Camera No.
Select a desired camera no. to add camera in decoder’s camera list.

Stream 1/ Stream 2 (Recording Stream)
Decide one stream as recording stream for video recording between stream 1
and stream 2 if cameras support dual streams.
Note: It is suggested stream 1 is set for higher resolution and stream 2 for
lower resolution, which helps users to choose the proper streaming on live view
with intuitive control.
Note: On liveview interface, decoder will display videos in stream 1 from
1-screen to 12-screen display mode. Decoder will display videos in stream 2
when display mode is above 16-screen.

Video Format
Choose a video compression format for live view and recording: MPEG4, H.264
and MJPEG.
Note: Types of video format varies depending on the camera brands and
models.
48