Download IC-E92D Instruction manual

New2001
New
12
MENU SCREEN OPERATION
■ DV set mode items
The following items are selectable for B band.
D Auto reply
This function replies to an individual station call even you are
away from the transceiver.
After a manual transmission (pushing [PTT]), the Auto Reply
setting returns to OFF automatically.
• OFF : No reply is performed even if a call is received.
(default)
• ON
: Sets the caller’s call sign and replies to the call
with the programmed own call sign.
• VOICE : Sets caller’s call sign and replies to the call with
the recorded audio in REPLY VOICE memory
of DV VOICE MEMO.
AUTO REPLY
r
OFF
ON
VOICE
D Digital code
Sets the desired digital code for digital code squelch operation. Total of 100 codes (00–99) are available. (default: 00)
DIGITAL CODE
00
99
D DV data TX
During low-speed data operation, auto data transmission
function is available. This function transmits when data has
been input from PC via the [DATA] jack.
(default: PTT)
DV DATA TX
r
PTT
AUTO
DV DATA TX
PTT
AUTO
r
AUTO REPLY
OFF
ON
r
VOICE
• PTT
• AUTO
NOTE: When “ON” or “VOICE” is set in the auto reply
function, the power save function (p. 96) stop functioning
automatically to receive call sign signal properly.
100
DIGITAL CODE
: Data from [DATA/SP/MIC] transmits when
[PTT] is pushed. (default)
: Data from [DATA/SP/MIC] transmits automatically.