Download IC-E92D Instruction manual

Transcript
New2001
New
6
REPEATER AND DUPLEX OPERATIONS
■ Duplex operation
Although [DIAL] and [ ](5) are used for description in this
section, [ ](2)/[ ](8) and [ ](6) are available instead of
[DIAL] and [ ](5).
D Setting duplex direction
➥ Push and hold [DUP](4) for 1 sec. to select “–DUP” (negative offset) or “+DUP” (positive offset).
• “–DUP” or “+DUP” indicates the transmit frequency for minus
shift or plus shift, respectively.
D Setting offset frequency
q Enter “OFFSET FREQ” in DUP/TONE… set mode. (p. 110)
❮MENU screen❯ ➪ ❮DUP/TONE…❯ ➪ ❮OFFSET FREQ❯
(Push [MENU/
]) (Rotate [DIAL]†, then push [ ](5)‡.)
w Rotate [DIAL]† to set offset frequency.
• 1 MHz and 10 MHz tuning steps are available by pushing and
holding [MHz](VFO) for 1 sec.: push [MHz](VFO) to cancel it.
e Push [ ](5) (or [ ](4)) to return to DUP/TONE… set
mode, and push [MENU/
cation.
DUP
] to return to frequency indi• When offset frequency is 0.6 MHz.
No offset frequency
OFFSET FREQ
4
0.6 MHz offset
OFFSET FREQ
0.000.00
0.600.00
–Duplex example
Receiving
-DUP TONE
FM
A
145300
+Duplex example
Receiving
+DUP TONE
FM
145300
A
PSKIP
PSKI
Transmitting
-DUP TONE
FM
A
144700
PSKIP
PSKI
32
†[DIAL]
↔ [ ](2)/[ ](8)
‡[
](5) ↔ [ ](6)
PSKIP
PSKI
Transmitting
+DUP TONE
FM
A
145900
PSKIP
PSKI