Download PDF - Oy LAI

User manual
LM 586
6.9.4 Engine air filter and safety element replacement
Figure 88.
1. Case 2. Safety element 3. Filter element 4. Cover 5. Dust pocket
► Stop the engine and remove the air filter cover (4).
► Remove the filter element and safety element (3 and 2), and clean the
inside of the filter case (1) with a dry, lint-free cloth.
► Clean the dust pocket (4) and the filter case cover (5).
► Install the new safety element (2) and the new filter element (3).
► Close the air filter protective cover.
Never run the engine without the air filter elements.
6.9.5 Pressure measurement and adjustment of steering hydraulics
The pressure measurement and adjustment of steering hydraulics must be
performed by an authorised service workshop.
6.9.6 Pressure measurement and adjustment of operating hydraulics
The pressure measurement and adjustment of operating hydraulics must be
performed by an authorised service workshop.
6.9.7 Steering hydraulics filter replacement
Figure 89.
1. Filter cup
► Park the machine on hard level terrain, and place a pan under the filter.
► Remove the filter cup and the filter element.
► Wash the cup in diesel fuel, install a new element inside the cup, and install
the filter cup.
Info!
Hydraulic oil is normally replaced together with filter replacement, See
6.9.9 on page 73.
72
06 Maintenance
Ver. 27102014