Download 4 - BZB Express
Transcript
Operating the VP-747 9.3 Operating via the Infrared Remote Control Transmitter You can control the VP-747 remotely, from the infrared remote control transmitter (that has a range of up to 15 meters and is powered by two AAA size 1.5V DC batteries), as defined in Figure 20 and Table 11: Figure 20: Remote Transmitter Table 11: Remote Transmitter Functions Keys Power Function Cycles power 1 Take 2 Pressing TAKE causes the transition to occur Lock Locks/unlocks the front panel Cut 3 Fade3 Selects an instantaneous transition from the PREVIEW output to the PROGRAM output Selects a dissolved transition from the PREVIEW output to the PROGRAM output 4,3 Selects a Diagonal transition effect Selects a WIPE transition effect 5,3 Selects a CIRCLE transition effect 6,3 Selects a SQUARE transition effect6,3 Selects a CORNER transition effect4,3 6,3 Picture Freeze Blank PIP Separate keys for PREVIEW/ PROGRAM Outputs Selects a CHESSBOARD transition effect Adjusts the picture contrast, brightness, saturation, auto gain, and auto image Toggles the freeze function of the output video image Toggles a blank screen Toggles the picture-in-picture function Save Saves the setting Recall Navigation Keys Recalls the setting Consists of a set of 5 separate keys that allow maneuvering within an OSD screen Menu Displays the OSD Menu screen (or moves to the previous level in the OSD menu) OSD Activates/deactivates access to the OSD Menu Selector 8 separate selector keys for both the Program and the Preview outputs 1 When “Off” the machine shuts down its outputs, disables the front panel, and causes the IR Receiver / LED to light red (instead of green) 2 The effect is only seen on the PROGRAM output 3 Only for setting up the unit for the effect. The effect will only occur when the Take button is pressed 4 Choose the direction from where the effect starts: “top left”, “bottom left”, “top right” or “bottom right” (see section 9.1.2) 5 Choose the direction from where the effect starts: “left to right”, “right to left”, “up” or “down” (see section 9.1.2) 6 Choose the direction from where the effect starts: “in” or “out” (see section 9.1.2) 37