Download Matrix System User Manual

Transcript
Matrix System
USER MANUAL
> Matrix Detailed System Description > Matrix-evb Board > Usb Hardware Registers
SET_UCNTH
Type
= Write
GPIDADR =3
D15-D4
000000000000
D3-D0
UCNT19-16
The least significant 4 bits defines D19 to D16 of the USB memory word count. The USB word count defines how
many words are to be transferred from the memory to the USB bus.
SET_UCNTL
Type
= Write
GPIDADR =4
D15-D0
UCNT15-0
This register defines D15 to D0 of the USB memory word count. The USB word count defines how many words
are to be transferred from the memory to the USB bus. This register is a 16-word PAGE register. The LSB
represents 16 words.
READ_USTAT
Type
= Read
GPIDADR =0
D15-D2
00000000000000
D1
UBSY
D0
MERR
MERR:When set to ‘1’ this bit indicates that the USB read process has not kept up with the READOUT Processor.
This bit is cleared by asserting the PR bit in the SET_UCTRL register.
UBSY:When set to ‘1’ this bit indicates that the USB data transfer processor is busy.
READ_REVR
Type
= Read
GPIDADR =1
D15-D0
REV
REV: 4 digit BCD value of the FPGA code revision
SensL © 2012
32