Download Matrix System User Manual
Transcript
Matrix System USER MANUAL > Matrix Detailed System Description > Matrix-evb Board > Usb Hardware Registers SET_UCNTH Type = Write GPIDADR =3 D15-D4 000000000000 D3-D0 UCNT19-16 The least significant 4 bits defines D19 to D16 of the USB memory word count. The USB word count defines how many words are to be transferred from the memory to the USB bus. SET_UCNTL Type = Write GPIDADR =4 D15-D0 UCNT15-0 This register defines D15 to D0 of the USB memory word count. The USB word count defines how many words are to be transferred from the memory to the USB bus. This register is a 16-word PAGE register. The LSB represents 16 words. READ_USTAT Type = Read GPIDADR =0 D15-D2 00000000000000 D1 UBSY D0 MERR MERR:When set to ‘1’ this bit indicates that the USB read process has not kept up with the READOUT Processor. This bit is cleared by asserting the PR bit in the SET_UCTRL register. UBSY:When set to ‘1’ this bit indicates that the USB data transfer processor is busy. READ_REVR Type = Read GPIDADR =1 D15-D0 REV REV: 4 digit BCD value of the FPGA code revision SensL © 2012 32