Download User Manual - GEOSYSTEM Software

100
Index
coefficient of uniformity, see Cu
Color, 64
color, 3, 8–9
compaction curve, see moisture-density curve
compaction test, see moisture-density
composite correction, 51
configuration, see settings
Connect test points with lines instead of curves, 14
container, see tare weight
Container ID, 3, 8, 34, 51
Container weights are entered as, 8, 34, 51
Control Panel, 8
Copy Entire Test, 81
Create .PDF pages in A4 page size, 12
CT-216, 1–2, 29, 72
Cu, 2, 53–54, 92
Cumulative Pan Tare Weight, 44
cumulative pan weight, 43
cumulative weight retained, 2, 36, 44, 46
curve
calculating values from, 54
for two point tests, 14
in color, 9
shaping, 2
shaping the moisture-density curve, 75–76
shaping the particle size curve, 53–54
with straight lines, 14
Curve number, 68, 97
Curve width, 14, 25
D10, D20, D30, etc., see calculated diameter sizes
data summary report, see summary report
Data-averaging curve, 77–78
Delete Data Row, 48
Delete the Selection List, 41
Delete this Test Point, 71
Denote point of max. dens./opt. moist. on charts, 26
density
entering test data for, 70
oversize correction, 30
units, 27
Density units, 27
description, see material description
diameter^0.45, 14, 54
disclaimer, see chart report: disclaimer on
Do not plot curves for tests with two points, 14
Draw extrapolated one-point curves on chart reports, 25
Draw one-point test match curves on chart reports, 25
Drop ’Checked by’ from reports, 10
Drop ’Tested by’ from reports, 10
Dry Sample and Tare, 43
DXF, see .DXF
Effective depth equation, 52
EMF, see .EMF
envelope, see specification envelope
Excel, see xml files
export, 4, 81, 91
www.geosystemsoftware.com
Export XML File, 91
exporting files, 12
f.m., see fineness modulus
field density, see Quality Control - Density
figure number, see chart report: figure number on
filter media, 4, 32
fineness modulus, 2, 15, 53–54, 92
Grain shape, 64
Granular, 64
Hammer drop, 31
Hammer wt., 31
help, see technical support
Highly organic soil, 62
hydrometer
entering test data, 35, 50–52
readings, 52
reported percentages, 16
type of, 52
Hydrometer reading at 20 C., 51
hygroscopic moisture, 34, 51
If you washed the sample over a #200 sieve..., 42
Include a disclaimer, 9
Insert at the Cursor, 64
Insert Data Row, 48
Insert Group Name at the Cursor, 61
Insert ID, 64
Insert symbol, 64
International Slurry Surfacing Association, 20, 39
ISSA, see International Slurry Surfacing Association
Label sample description, 15
Larger than 3in., 60, 62, 63
Layer name, 90
LD4, see boring log
left margin, 8
linear, 3, 14
liquid limit, 2, 22–23, 56–57, 60, 62, 96
liquidity index, 2, 4, 23, 58, 96
log(size) vs. probability, 3, 13–14
Make a selection list, 40–41
margins, 4, 8
material description, 5, 15, 36
Material larger than gravel is, 16
Max. dens. size, 54
maximum density, 97
denoted on chart, 5
rounding, 5, 27, 29
units, 27
maximum density line, 54
Maximum diameter, 13
maximum dry density, 2
medium, 38
meniscus correction, 52
metafile, 81, see .EMF
LabSuite by GEOSYSTEM Software