1
Download User Manual - EWD Solutions
Transcript
Display on Digital Readout indicates a malfunction. Little or no vacuum Refer to Display Error Messages. Vacuum Cup will not hold component Worn vacuum pump Worn or broken vacuum cup Replace vacuum pump. Contact PACE for assistance. Replace vacuum cup. Vacuum Pickup Rod binding Vacuum Pickup rod is bent Refer to the Vacuum Pick Replacement on Page 37. Vacuum Pick Replacement Removal 1. Turn the knob counterclockwise to remove it from the shaft. Hold the shaft when loosening in order to keep the shaft from rotating. 2. Remove the vacuum hose. 3. Remove the Pick Shroud. (Requires a 9/64” hex key). 2 hex socket head screws ©2004 PACE Inc., Annapolis Junction, Maryland All Rights Reserved Page 37 of 45
