Download 2007 - Aries Spas

Transcript
Aries Spas • User Manual
flow and water is trapped in the heater for longer-than-normal periods of
time.
If the Limit Switch trips, the digital temperature readout will flash, intermittently reading “OH”. This “Intermediate Overtemp” will disable
the heater until the spa water inside the equipment cools down. When the
display stops flashing, the heater’s function is restored.
The “Catastrophic Overtemp” happens when temperatures have reached a
critical degree. When this happens, the display will read “HL”. You must
wait until the temperature in the equipment has had time to cool, then
manually reset the system by turning the equipment off, then on, using
your breaker or service disconnect.
Interior Fittings
Venturi Controls (Air Controls)
Venturi Controls are knobs located on the upper ledge of your spa. Depending on the model, your spa may
have one or several Venturi Controls,
each operating a certain number of jets.
They control the amount of air that is
mixed with the water coming through the
jets, which increases or softens the pressure of the jets.
To control the amount of air introduced
into your jets, turn the Venturi Control
to the desired setting. For maximum air
injection and a firmer massage, turn the
knob toward counterclockwise. For a
more gentle massage, turn toward clockwise.
Venturi
When the jet pump is not running, the venturis will do nothing. It does
not matter what position they are left in when you leave the spa.
Page 12