Download LED-MS700 PE User Guide

minute to exit menu mode.
Focus 2
Select Focus 2, press ENTER button to confirm, present mode will blink on the display,
use UP/DOWN button to adjust the value from 0 to 255, press ENTER button to store.
Press MENU button back to the last menu or let the unit idle one minute to exit menu
P/T Feedback — pan/tilt Feedback
mode.
Select P/T Feedback, press ENTER button to confirm, present mode will blink on the
display, press UP/DOWN button to select No (Pan or tilt’s position will not feedback
Sound Trigger—Sound Mode
while out of step.) or Yes (Feedback while pan/tilt out of step. ), press ENTER button to
Select Sound Trigger, press ENTER button to confirm, present mode will blink on the
store. Press MENU button back to the last menu or let the unit idle one minute to exit
display, use UP/DOWN button to select Off (Sound Mode off) or On (Sound Mode On),
menu mode.
press ENTER button to store. Press MENU button back to the last menu or let the unit
Iris Inverse
idle one minute to exit menu mode.
Select Iris Inverse, press ENTER button to confirm, present mode will blink on the
Sound Sensitivity
display, use UP/DOWN button to select No (normal) or Yes (iris inverse), press
Select Sound Sensitivity, press ENTER button to confirm, present mode will blink on
ENTER button to store. Press MENU button back to the last menu or let the unit idle
the display, use UP/DOWN button to adjust the sound sensitivity from 0 to 100 , press
one minute to exit menu mode.
ENTER button to store. Press MENU button back to the last menu or let the unit idle
BL.O. P/T Moving—Blackout while pan/tilt moving
one minute to exit menu mode.
Select BL.O. P/T Moving, press ENTER button to confirm, present mode will blink on
Fixture Settings
the display, use UP/DOWN button to select No (normal while pan/tilt moving) or Yes
Enter menu mode, select Fixture Settings, press ENTER button to confirm, use
(blackout while pan/tilt moving), press ENTER button to store. Press MENU button
UP/DOWN button to select Pan Inverse, Tilt Inverse, P/T Feedback, Iris Inverse,
back to the last menu or let the unit idle one minute to exit menu mode.
BL.O. P/T Moving, BL.O. Color Change, BL.O. Gobo Change.
BL.O. Color Change—Blackout while change color
Pan Inverse
Select BL.O. Color Change, press ENTER button to confirm, present mode will blink
Select Pan Inverse, press ENTER button to confirm, present mode will blink on the
on the display, use UP/DOWN button to select No (normal while changing color) or
display, use UP/DOWN button to select No (normal) or Yes (pan inverse), press
Yes (blackout while changing color), press ENTER button to store. Press MENU
ENTER button to store. Press MENU button back to the last menu or let the unit idle
button back to the last menu or let the unit idle one minute to exit menu mode.
one minute to exit menu mode.
BL.O. Gobo Change—Blackout while change gobo
Tilt Inverse
Select BL.O. Gobo Change, press ENTER button to confirm, present mode will blink
Select Tilt Inverse, press ENTER button to confirm, present mode will blink on the
on the display, use UP/DOWN button to select No (normal while changing gobo) or
display, use UP/DOWN button to select No (normal) or Yes (tilt inverse), press ENTER
Yes (blackout while changing gobo), press ENTER button to store. Press MENU
button to store. Press MENU button back to the last menu or let the unit idle one
button back to the last menu or let the unit idle one minute to exit menu mode.
12-
13-