Download M68HC11 PCbug11 USER`S MANUAL

Freescale Semiconductor, Inc.
USING PCBUG11 COMMANDS
MS addr byte|word [byte|word]
Set MCU memory byte(s)
or word(s)
This command forces as many as nine 8- or 16-bit values into MCU memory, starting at address
addr. If addr is in an EEPROM block, an EEPROM algorithm stores the value (the difference is
transparent to the user).
Freescale Semiconductor, Inc...
NOTE
To set the memory value to $00, do not specify the $00 in the most
significant byte of a 16-bit value. PCbug11 interprets such a
specification as an 8-bit value, leading to incorrect MCU memory
addressing.
Usage:
MS $1000 $AA
Assign value $AA to address $1000
MS $C000 $1234 $56
Assign values $12, $34, and $56 to addresses $C000, $C001, and
$C002
MS $50 $55AA $FF00
Assign values $55, $AA, $FF, and $00 to addresses $50, $51,
$52, and $53
Related commands:
3-44
BF, DB, MD, MM
For More Information On This Product,
Go to: www.freescale.com
M68PCBUG11/D