Download User Manual - Full Compass

Pa500-110UM-ENG.book Page 167 Friday, March 28, 2008 11:12 AM
SongBook
Book
Filter…
167
After you select this command, the “Num” column appears:
Press this button to open the Filter dialog box, and select one or
more filter criteria, to show a restricted set of entries in the main
list.
Press the Clear button next to the search criterion you want to
delete or set to a default value.
To select a SongBook entry by entering its number, press the
SONGBOOK button again while you are in any page of the
SongBook mode. The numeric keypad will appear, allowing you
to enter the number corresponding to the desired entry.
Press Clear All to reset all search criteria, excluding Tempo.
Selecting SongBook entries via MIDI
Add to list
Select an entry, then press this button to add the selected entry
to the current Custom List (see “Custom List” on page 171).
SongBook entries can be selected via MIDI (through the special
Control channel), by using the NRPN dedicated Control Change
messages #99 (MSB, with value 2) and #98 (LSB, with value 64).
See “Selecting SongBook entries via MIDI” on next page.
Select
Setting the special Control MIDI channel
Press this button to confirm selection of the highlighted entry in
the main list. After pressing this button, the name of the selected
entry appears in the left upper corner of the display (“N:”).
First of all, go to the Global > MIDI > Setup/General Control
page and select a MIDI Setup to be used when you will remotely
select SongBook entries.
When you select a song in any of the SongBook lists, its name
appears in reversed text, over a black background. While in this
situation, the song is selected, but not yet loaded.
Then go to the Global > MIDI > Midi In Channel page, to assign
a MIDI channel to the special Control channel. Assign the Control option to one of the sixteen available MIDI channels (usually one of the higher-numbered ones).
When you press the Select button in the display, the song will be
loaded.
Numeric selection of entries
When in SongBook mode, you can select a SongBook entry by
means of an unique number. Numbers associated with each
entry are added in the Book Edit 2 page (see “Book Edit 2” on
page 170).
To see the numbers while in the Book page, select the “Show
Song Numbers (now Key)” command from the page menu:
When done, save this setting to the current MIDI Setup by
choosing the “Write Global-Midi Setup” command from the
page menu.
If you plan to use a different MIDI channel for the Style Play and
Song Play modes, repeat the above to create a second MIDI
Setup.
Assigning a MIDI Setup to the Style Play and Song Play
modes
Since SongBook entries dynamically recall the Style Play or the
Song Play modes, it is advisable to assign them the same MIDI
Setup, or two different MIDI Setups with the Control channel
assigned to the same MIDI channel. This way, the same MIDI
channel will be used to select a SongBook entry in either the
Style Play or Song Play mode.
When one of the operating modes is recalled, the MIDI Setup
memorized in the Style Play Setup or in the Song Play Setup will
be automatically selected, and MIDI channels will be automatically configured.
To assign a MIDI Setup to each of the two operating modes:
• In Style Play mode, go to the Style Play > Preferences > Style
Setup page, and select a MIDI Setup. Select the Write GlobalStyle Setup command from the page menu.
Reference
Press the
(Text Edit) button next to the search criteria you
want to edit (Name, Genre, or Artist). You can also select a
Meter, or a range of Tempo values.
To see the “Key” column again, select the “Show Key (now Song
Numbers)” command from the page menu.