Download User Manual - Full Compass

Pa500-110UM-ENG.book Page 186 Friday, March 28, 2008 11:12 AM
186
Sequencer operating mode
Edit menu
Tabs
Edit menu
Use tabs to select one of the edit pages of the current edit section.
From any page, press the MENU button to open the Sequencer edit
menu. This menu gives access to the various Sequencer edit sections.
When in the menu, select an edit section, or press EXIT to exit
the menu.
When in an edit page, press EXIT or the SEQUENCER button to
go back to the main page of the Sequencer operating mode.
Mixer/Tuning: Volume/Pan
This page lets you set the volume and pan for each Song track.
Use the TRACK SELECT button to switch between Song tracks
1-8 and 9-16.
Each item in this menu corresponds to an edit section. Each edit
section groups various edit pages, that may be selected by pressing the corresponding tab on the lower part of the display.
Edit page structure
All edit pages share some basic elements.
Operating mode
Edit section
Page menu
icon
Selected
track info
Dry
Use this checkbox to turn the dry (direct) signal on or off.
On
Parameters
area
When checked, the direct, dry signal is sent to the
output, mixed with the FXs.
Track
Out L/R
FX Processor
Tabs
Off
This indicates that the instrument is in Sequencer mode.
When unchecked, the direct, dry signal is
removed from the audio output, and only sent to
the FXs. The effected signal will still be panned
(in stereo FXs only) according to the Pan value.
Edit section
Track
Operating mode
This identifies the current edit section, corresponding to one of
the items of the edit menu (see “Edit menu” on page 186).
Page menu icon
Press this icon to open the page menu (see “Page menu” on
page 196).
Parameters area
Each page contains various parameters. Use the tabs to select
one of the pages. For detailed information on the various types
of parameters, see sections starting from page 186.
Out L/R
FX Processor
Pan
Track position in the stereo field.
L-64…L-1
Left stereo channel.
C 00
Center.
R+1…R+63
Right stereo channel.