Download D2nc User Manual
Transcript
45
D2nc User Manual
Later on during path definition 40 each of the operations, for example contouring or drilling, are
performed on an entire shape definition. In this example Shape 0 could be left contoured while Shape
1 could be peck drilled.
3.3
Simple Shape
This quick "one line" shape may help you grasp Shape Description Language.
d1a90,.5
d1a90,.5
d1a90,.5
d1a90,.5
or
r{d1a90,.5}4
r
{
repeat
open inline block
© 2005-2010 D2nc Software