Download Exhibit 9 - RailCorp Simulator Specification

1.6.1
All systems, subsystems, equipment and components of the Simulators shall be
capable of being safely, successfully and sustainably integrated into RailCorp systems
where they must inter-operate.
1.6.2
Any requirements for components, environments or resources to be supplied by
RailCorp to achieve the required level of system integration shall be stated clearly.
This shall include proposed data schemas, expected data volumes to be handled
across interfaces with RailCorp, requirements for connectivity approaches, bandwidth
of communications links and any other relevant content details and related topics
which may impact RailCorp’s ICT infrastructure capacity.
1.6.3
All interfaces with RailCorp ICT systems, subsystems, equipment and components
shall be capable of supporting bi-directional standards, protocols and data.
1.6.4
Interfaces shall be compliant with the standards of the IEEE Rail Transit Vehicle
Interface Standards Committee or accepted non-proprietary equivalent international,
national or industry standards.
1.7
Safety Systems
1.7.1
All ICT systems, subsystems, equipment and components that have safety attributes,
or have interfaces to RailCorp ICT systems (whether explicitly related to safety or not),
shall be identified and shall comply with EN 50128, or an accepted non-proprietary
equivalent international, national or industry standard. Any safety related data
transferred from any ICT systems, subsystems, equipment and components to any
RailCorp ICT system, by any means, shall also be clearly identified.
v15 – 17/01/2011
Page 8 of 36