Download NVRP4 User Manual

Chapter 3
Customizing the NVR System
In the Preview screen mode, click
button to customize your NVR. Enter the ID and password to
authenticate (Default ID is admin and password is admin).
When the NVR configuration setup selection appears, select and click on the button of the setting that you
want to change.
3.1 System Setup
In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving.
(8)
(1)
(9)
(2)
(3)
(4)
(10)
(5)
(6)
(11)
(7)
(1) Storage Path
Indicates which HDD the data is being stored on. In case there is more than one storage device, the
system automatically saves the data to the next storage device. To insert another storage device, click
Add and select the storage path. To remove the selected path, click Delete.
If the hard disk is being used for the first time in the NVR system, please format the hard disk before use.
To format the hard disk, click Add and select the hard disk and Format in Disk Management window, and
then, click Format button.
19