Download NVRP4 User Manual

1.
2.
3.
4.
5.
Click the radio button of Protocol to setup IP camera.
Select the Protocol, Model, Video Format, and Channel of the IP camera.
Enter IP address and connecting port in IP Camera Site column.
Also, user can enter URL of IP camera instead of IP address.
If the IP camera has authentication request, please enable Authentication and enter ID and
Password.
6. Click OK to connect with the IP camera.
Detail: To adjust IP camera parameters, click Detail.
Click on Default to revert to the factory default values.
User can select Video size, Frame rate, Bitrate mode and Quality of camera.
Bright, Contrast, Hue, Saturation, and I/O Control of the camera.
i
The selection and adjustment items may vary by the camera supported.
26
User can also adjust