Download Netra Proxy Cache Array User`s Manual

Test Objects
The test objects listed below are shipped with the Netra Proxy Cache product. Their
output is displayed in the Host Status page that you invoke from the Array Status
page.
cache_connect_test
An object of type ConnectTest (5). Tests the TCP port used by the proxy cache
service (8080). Also tests the service address(es) and control address used by the
proxy cache service. The test object instance is configured to test persistent TCP
connections. The parameters for this test object are as follows:
ConnectTest cache_connect_test
port=8080
check_addr=0.0.0.0
interval=10
retries=3
retry_interval=2
reset_min_interval=60
monitor_object=cache_monitor
max_connect=99999999
check_control=true
persistent_connection=true
connection_test_object=cache_http_test
cache_process_test
An object of type ProcessTest (5). Tests for the presence of the process associated
with the proxy cache service. The parameters for this test object are as follows:
ProcessTest cache_process_test
process_id_script="/etc/init.d/scalr.cache getpid"
interval=2
retries=3
retry_interval=2
reset_min_interval=60
cache_test
An object of type AndTest (5). Combines the outputs from cache_connect_test,
cache_process_test, and service_interface_test. Reports failure to the
monitor object (cache_monitor) if any of these “child” test objects returns failure.
The parameters for this test object are as follows:
AndTest cache_test
test_objects=cache_connect_test,cache_process_test
reset_script="/etc/init.d/scalr.cache restart"
reset_min_interval=60
monitor_object=cache_monitor
156
Netra Proxy Cache Array User’s Manual ♦ Revision A, March 1998