Download FPD-21 Series
Transcript
FPD-21 Series Product Guide CONTEC CO.,LTD. Be sure to read the “IPC Precaution List” and “ User’s manual” before using this product. Unpacking Unpacking the contents carefully. Save and store all of the packing materials and boxes in case the FLAT PANEL DISPLAY is shipped in the future. Check the contents to make sure that you have everything listed below. If anything is missing , please contact CONTEC. This Product Include FPD-M21VT-AC FPD-L21ST-AC FPD-H21XT-AC Pcs. Pcs. Pcs. Flat panel display 1 1 1 Three-point sems screws (M3 x 6) 1 1 1 Cable fixed clamp 3 3 3 The attachment fittings 6 6 8 Warranty Certificate 1 1 1 EU Declaration of Conformity - - 1 IPC Precaution List 1 1 1 Ferrite Core 1 1 3 Ferrite Core fixed clamp - - 2 Product guide (this sheet) 1 1 1 Serial number nabel 1 1 - Name Notes Users manual and cable are not include. Option Available The more details information about option should look at Web. Model * 1 Description FPD-21-HMJ User’s manual (Japanese) FPD-21-HMU User’s manual (English) IPC-CBL3-2 RS-232C Cable for touch panel (2m) IPC-CBL3-5 RS-232C Cable for touch panel (5m) IPC-ACCODE3 AC power cable (2m, 125VAC) IPC-CV Screen protection sheet for IPC-DT/M61VT (10 Sheets) IPC-CV12 Screen protection sheet for IPC-DT/L61SVT (10 Sheets) IPC-CV15 Screen protection sheet for IPC-DT/H61XT (10 Sheets) IPC-SLIB-01 Touch Panel Driver & Utility Software for WINDOWS For the latest information on the option, refer to the CONTEC’s Web site. FPD-21 Series FPD-21 Series Product Guide Recommended cable made by SANWA SUPPLY. INC. Model Description KC-V2 (2m) Analog display cable (2m) KC-V5 (5m) Analog display cable (5m) KU20-2H USB Cable for touch panel (2m) KU20-5H USB Cable for touch panel (5m) Limited One Year Warranty CONTEC FLAT PANEL DISPLAY is warranted by CONTEC to be free from defects in material and workmanship for up to one year from the date of purchase by the original purchaser. Replacement or repair will be free of charge only when this device is returned to CONTEC freight prepaid with an original invoice. This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and original boards. The warranty is not applicable if the device has been tampered with or damaged through abuse, mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in which case repairs will be considered beyond the warranty policy. If a replacement with a new device is needed, regular factory prices will be charged, the product will be returned to you COD, and no other written warranty will apply. The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be liable for any incidental or consequential damages due to such defect or consequences that arise from inexperienced usage, misuse, or malfunction of this device. How to Obtain Service For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please obtain a Return Merchandise Authorization number (RMA) from our Sales Administration Department before returning any product. No Product will be accepted without an RMA number. Copyright 2007 CONTEC CO., LTD. ALL RIGHTS RESERVED. CONTEC CO., LTD. September 2014 Edition 3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan Japanese http://www.contec.co.jp/ English http://www.contec.com/ A-51-523 (LYHR664) Chinese http://www.contec.com.cn/ 07312014_rev4 [12052007] No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD.