Download IPC-DT/H61XT-AC0

Ver.1.00
Aluminum Face Panel-Mount Type
Flat Panel Display
DC12V Power Supply, 6"TFT, Analog/DVI
DC12V Power Supply, 10"TFT, Analog/DVI
IPC-DT/S61VT-DC1
IPC-DT/M61VT-DC1
AC Wide Power Supply, 10"TFT, Analog/DVI.
IPC-DT/M61VT-AC0
DC12V Power Supply, 12"TFT, Analog/DVI
IPC-DT/L61SVT-DC1
AC Wide Power Supply, 12"TFT, Analog/DVI.
IPC-DT/L61SVT-AC0
DC12V Power Supply, 15"TFT, Analog/DVI
IPC-DT/H61XT-DC1
AC Wide Power Supply, 15"TFT, Analog/DVI.
This product is a dual-input (analog RGB and DVI-D), panelmounted, color TFT LCD display unit for use with host computers
such as the CONTEC IPC series and SBCs (single board computers).
Features
- Full-bright, wide-angle-of-visibility type of liquid crystals capable
of displaying up to 262,144 colors (16,777,216 colors on the IPCDT/H61XT-DC1 and AC0)
- Standard analog RGB input for screen. RS-232C and USB
interfaces for touch panel.
- Multiple touch panel configurations containing up to eight touch
panels are supported when using the USB touch panel interface.
- Auto-scaling feature that resizes the input screen to the LCD dot
configuration.
- On-screen display setup menu facilitating screen adjustment
- Dual-input function supports analog RGB and DVI-D inputs.
The display can be connected to two different computers at once.
(Simultaneous display is not supported. Screens are switched
using the OSD.)
- Analog touch panel enabling mouse emulation using driver
software
- Optional AC adapter (IPC-ACAP12-01) available for AC power
supply.
- Front structure with IP65-compliant ingress protection
- Optional stand kit available for desktop use.
- A special fitting is provided to prevent the AC adapter cable from
being unplugged.
IPC-DT/61 Series
IPC-DT/H61XT-AC0
Use environment
This product operates under the following operating systems:
Windows XP/2000/NT 4.0/98SE/95OSR2, MS-DOS 6.2
* The touch panel USB interface is only supported on Windows
XP/2000/98SE.
Life expectancy of components
(1) Backlight--- Display brightness decreases over time with use.
The operating life of the backlight (brightness reduced to 50% of
original) is 50,000 hours for all models. (Assuming continuous
operation at 25 centigrade.)
(2) Touch panel--- The operating lifetime of the touch panel is at
least 1 million touches (as tested by mechanical touching under
300g of force at a rate of two presses per second).
(3) Power supply (AC adapter) --- Expected life is six years for
continuous operation at 40 (when mounted horizontally).
However, this life may be reduced depending on the operating
temperature (in the case of higher temperatures).
* CONTEC accepts your request for replacing each consumable in
the PANECON-PC as a request for repair (at an additional cost).
Contact your local retailer or CONTEC sales office.
1
Ver.1.00
Specification
Specification
Item
IPC-DT/S61VT-DC1
IPC-DT/M61VT-DC1
IPC-DT/L61SVT-DC1
IPC-DT/H61XT-DC1
IPC-DT/M61VT-AC0
IPC-DT/L61SVT-AC0
IPC-DT/H61XT-AC0
Screen
Assembly type
Panel mounted, desktop *1
Screen size
6.5 inches
10.4 inches
12.1 inches
15.0 inches
Number of pixels
640 x 480 dots
640 x 480 dots
800 x 600 dots
1024 x 768 dots
Display type
TFT Color LCD
Number of colors
262,144 colors
262,144 colors
262,144 colors
16,777,216 colors
Screen adjustment
Automatic adjustment (display positioning and scaling) and manual adjustment using the front
switches
Brightness control
Adjustment using the front switch or software control from the host computer
Backlight control
Can be turned on or off by an OSD switch or via software control from the host computer.
Display interface
Analog RGB input HD-SUB 15 pin (Female) connector
DVI-D input 24 pin DVI (Female) connector
Incoming
signal
Separate RGB, analog, positive polarity 0.7Vp-p/75Ω
Separate V/H, TTL, positive/negative polarity
Analog
RGB input
specification
Horizontal:
DVI-D input
Cable length which recommends
31 - 80kHz, vertical:
56 - 75Hz
Digital RGB (complies with TMDS) *2
5mm or less *3
Touch panel
Resolution
4096 x 4096
Detection method
Resistive-layer analog method
Touch life expectancy
One million repeated touches (silicon rubber load of 3 N)
Touch panel interface
Connect to the host computer using either USB*4 or RS-232C.
USB: USB1.1-compliant, TypeB Connector
RS-232C: 9pin D-SUB (Male) Connector
Touch panel driver
(option)
For Windows: IPC-SLIB-01
For MS-DOS: IPC-TPB1-DRV
*1 Optional desk stand IPC-SND-03 allowing desktop installation
*2 If the output is from a CONTEC IPC series or SBC series model, an ISA bus type panel link I/F board (ADPLNK(PC)H) is required
for some models. Please confirm before purchasing.
*3 Using a cable longer than 5 m may reduce the image quality. The cable should be as short as possible as degradation.
in image quality may result even when the cable is 5 m or shorter depending on the type of host computer or cable.
*4 The touch panel USB interface is only supported on Windows XP/2000/98SE.
Specification
Item
IPC-DT/S61VT-DC1
IPC-DT/M61VT-DC1
IPC-DT/L61SVT-DC1
IPC-DT/H61XT-DC1
Power supply input part
Power supply connector
4-pin nylon connector for 12 VDC power supply
AC adapter jack for 12 VDC power supply
AC adapter jack
(An optional AC adapter (IPC-ACAP12-01) can be used for 100 - 240VAC input.)
Input power supply voltage
+12VDC±5%
Consumption current
1.3A(Max.)
Consumption current
(power save mode)
0.4A(Max.)
Item
1.4A(Max.)
1.6A(Max.)
2.5A(Max.)
Specification
IPC-DT/M61VT-AC0
IPC-DT/L61SVT-AC0
IPC-DT/H61XT-AC0
Power supply input part
Power supply connector
Three-pin terminal block for the AC power supply
Input power supply voltage
Auto-switched 85 - 132VAC / 170 - 265VAC (47 - 63Hz) input
Power consumption
36VA (Max.)
Current consumption
(power save mode)
IPC-DT/61 Series
40VA (Max.)
60VA (Max.)
14VA (Max.)
2
Ver.1.00
Item
Specification
Environment
Operating temperature
0 - 50ºC (0 - 40ºC when using an IPC-ACAP12-01 (AC switching adapter))
Storage temperature
-10 - 60ºC
Operating humidity
(20 - 80% when using an IPC-ACAP12-01 (AC switching adapter))(No condensation allowed)
Floating dust
Normal
Corrosive gas
None
AC line: 2 kV, Signal line: 1 kV
(IEC1000-4-4Level3, EN61000-4-4Level3)
Line noise
Noise
resistance Electrostatic
withstanding
voltages
Vibration
(HOST: IPC-BX/M600(PCW) Power supply: IPC-POA200/12-01)
Contact: 4 kV(IEC1000-4-2Level2, EN61000-4-2Level2)
Airborne: 8 kV(IEC1000-4-2Level3, EN61000-4-2Level3)
(HOST: IPC-BX/M600(PCW) Power supply: IPC-POA200/12-01)
10 - 57 Hz/Single-side amplitude or 0.15 mm
Sweep
57 - 150 Hz/2.0 G in the X/Y/Z directions for 23 minutes each
(Conforming to JIS C0040 and IEC68-2-6)
resistance durability
Shock resistance
10 G in the X/Y/Z directions for 11 ms; Half-sine wave
(Conforming to JIS C0041 and IEC68-2-27)
Specification
Item
IPC-DT/S61VT-DC1
IPC-DT/M61VT-DC1
IPC-DT/L61SVT-DC1
IPC-DT/H61XT-DC1
Structure
Major dimension (mm)
198(W)x35(D)x154(H) 291(W)x38.5(D)x226(H) 302(W)x41.5(D)x242(H) 359(W)x41(D)x284(H)
(Board depth)
(Board depth)
(Board depth)
(Board depth)
Panel cut dimensions (mm)
199.0(W)x155.0(H)
292.0(W)x227.0(H)
303.0(W)x243.0(H)
358.0(W)x289.0(H)
Mountable panel
thickness
1.6mm - 7mm
Weight
1.3kg
2.6kg
2.9kg
3.9kg
Ingress protection
Front part conforming to IP65
Specification
Item
IPC-DT/M61VT-AC0
IPC-DT/L61SVT-AC0
IPC-DT/H61XT-AC0
291(W)x46.5(D)x226(H)
302(W)x49.5(D)x242(H)
359(W)x49(D)x284(H)
(Board depth)
(Board depth)
(Board depth)
Panel cut dimensions (mm)
292.0(W)×227.0(H)
303.0(W)×243.0(H)
358.0(W)x289.0(H)
Mountable panel thickness
1.6mm - 7mm
Weight
2.8kg
3.1kg
4.1kg
Ingress protection
Front part conforming to IP65
Structure
Major dimensions (mm)
Specifications (25ºC Typ. Value)
Item
Visual angle
(vertical)
Visual angle
(horizontal)
Condition
φ=180°
CR≥10
Display in
φ=0°
IPC-DT/S61VT-DC1
IPC-DT/M61VT-DC1
IPC-DT/L61SVT-DC1
IPC-DT/H61XT-DC1
IPC-DT/M61VT-AC0
IPC-DT/L61SVT-AC0
IPC-DT/H61XT-AC0
45deg
50deg
50deg
45deg
35deg
70deg
70deg
55deg
φ=+90° monochrome
50deg
70deg
70deg
60deg
φ=-90°
50deg
70deg
70deg
60deg
300cd/m2
400cd/m2
350cd/m2
260cd/m2
Surface
brightness
(at center)
Display in white
*1 Surface brightness is a numerical value in a display simple substance.
The brightness that let the touch panel pass serves as about 75% of the above-mentioned numerical value.
Measurement direction
Z
( θ = 0o )
Left
( φ = -90o )
θ
Top
( φ = 180o )
X
φ
Module
Bottom
( φ = 0o )
The above optical specification data shows optical characteristics
of the liquid crystal in the display; the data does not represent the
actual view on the display or its viewing angles.
Right
( φ = 90o )
Y
IPC-DT/61 Series
3
Ver.1.00
Options
-
IPC-CV6
IPC-CV
IPC-CV12
IPC-CV15
: 6.4-inch screen protective sheets (10 sheets)
: 10-inch screen protective sheets (10 sheets)
: 12.1-inch screen protective sheets (10 sheets)
: 15-inch screen protective sheets (10 sheets)
-
IPC-DVI/D-020
IPC-DVI/D-050
IPC-PLDVI-020
IPC-PLDVI-050
IPC-CBL3-2
IPC-CBL3-5
- IPC-SLIB-01: Driver & Utility Soft Set (CD-ROM version)
- IPC-SND-03
: Desk stand
- IPC-ACAP12-01 : +12 VDC output AC adapter
Input: Voltage = 90 - 264V AC, Current =1.3A (Typ.)
(for input voltage = 100V AC)
Output: Voltage = 12V DC, Current = 3.5A
: DVI-D cable (2m)
: DVI-D cable (5m)
: Panel link - DVI-D conversion cable (2m)
: Panel link - DVI-D conversion cable (5m)
: Touch panel, COM cable (2m)
: Touch panel, COM cable (5m)
-
KC-V2
KC-V5
KU20-2H
KU20-5H
: RGB display cable (2m)
: RGB display cable (5m)
: USB cable for touch panel (2m)
: USB cable for touch panel (5m)
Outside Dimensions
27
4-M4 TAP
(Maximum tapping length:5mm)
INS PECT
DVI
PASS
166
154
75
XXXXXXXXX
MODEL : XXXXXXXXXXXXXXX XXX
SERIAL No. : XXXXXXXX XXXXX
INPUT : XXXXXXXXXXX XXXXXXX
105
58
VGA
USB
75
CO M
XXXXXXXXX
XXXXXXXXX
2
12V DC-IN
1
CAUTION!
The screw b olting torque of attachme nt
must be 0.6N-m(MAX)
198
ME NU
M3 TAP
(Maximum tapping
length:5mm)
50
-
ESC
+
POW ER
138
210
CA U TI ON !
D o n' t co nn ec t 1 an d 2 of
1 2V D C -I N s m
i ul ta n eou sl y.
16
35
12 V D C -IN* 1*2 ** *
[mm]
5
*** ** ** *** **
8-M4 TAP
(Maximum tapping lenght:5mm)
87.7
240
163.4
226
DV I
COM
- +
FG
D on't connect 1 and 2of
12V DC - IN sim ul t aneou ls y.
12 VD C- IN*1 *2***
****** ******
CAUTION!
2
12VDC-IN 1
6.5
27.5
100
75
VG A
USB
100
75
MENU
IPC-DT/61 Series
5 38.5
49
18.5
291
M3 TAP
(Maximum tapping
length:5mm)
-
+
ESC
POWER
216.2
305
[mm]
4
Ver.1.00
100
75
96.8
189.5
FG
12VD C- IN *1*2***
************
12VDC-IN 1
2
CAUTION!
D on' t connect 1an d2 of
1 2VD C- IN sim u lt aneou ls y.
- +
CO M
256
242
DV I
27.5 100
6.5
75
VG A
USB
8-M4 TAP
(Maximum tapping length:5mm)
-
MENU
ES C
POWER
251
316
5
[mm]
41
21
21.5
54.5
+
5 41.5
302
M3 TAP
(Maximum tapping
length:5mm)
123
305
233
288
CO M
D VI
VG A
100
75
U
SB
220
357
M EN U
-
+
ES C
P OWE R
8-M4 TAP
(Maximum tapping
length;5mm)
75
100
M3 TAP
309
376
(Maximum tapping
length;5mm)
[mm]
100
75
87.7
240
163.4
226
39.3
D VI
CO M
67.4
N
L
6.5
27.5
100
75
VGA
USB
8-M4 TAP
(Maximum tapping length:5mm)
MENU
IPC-DT/61 Series
+
ESC
POWER
216.2
305
49
18.5
67.5
5 38.5 8
291
148
-
[mm]
5
Ver.1.00
100
75
96.8
256
189.5
242
40.3
67.4
N
L
6.5
COM
27.5
D VI
100
75
VGA
USB
8-M4 TAP
(Maximum tapping length:5mm)
-
MENU
ES C
POWER
251
316
54.5
[mm]
21
8 41 5
21.5
67.5
+
5 41.5 8
302
148
123
305
233
288
N
L
C OM
DV I
100
75
V GA
69.3
USB
67.4
148
220
357
M ENU
8-M4 TAP
(Maximum tapping
length:5mm)
75
100
-
+
E SC
POW ER
309
376
[mm]
Part Names
Screen & Touch panel
Front
MENU
-
ESC
+
Screen adjustment switch
Right side
POWER
POWER LED
Left side
USB
USB touch panel connector
V GA
Analog RGB connector
D VI
Back
DVI-D connector
XXXXXXXXX
MODEL : XXXXXXXXXXXXXXXXXX
SERIAL No. : XXXXXXXXXXXXX
INPUT : XXXXXXXXXXXXXXXXXX
INS PECT
P AS S
2
12VDC-IN
1
CAUTION!
The screw bolting torque
of attachment must be
0.6N-m(MAX).
CO M
XXXXXXXXX
XXXXXXXXX
RS touch panel connector
AC adapter jack
+12VDC power connector
CAUTION!
D o n' t co nn ect 1 and 2 o f
1 2 VDC-IN sim ulta ne ously.
12 V DC-IN *1 *2 ** *
** * *** ** ** * *
IPC-DT/61 Series
6
Ver.1.00
Front
Screen & Touch panel
M ENU
-
+
ESC
POW ER
Screen adjustment switch
Left side
Back
USB touch panel connector
USB
Right side
POWER LED
VGA
Analog RGB connector
DV
DVI-D connector
12VDC-IN 1
COM
RS touch panel connector
AC adapter jack
2
CAU TIO N!
12VD C - IN si mult an eousl .y
12 VD C I- N*1*2***
****** ******
D on't conn ect 1 an d2 of
F
-
+
+12VDC power connector
Front
Screen & Touch panel
ME NU
-
+
Screen adjustment switch
POW ER
POWER LED
Back
Left side
N
L
COM
DV
VGA
USB
Right side
ESC
IPC-DT/61 Series
USB touch panel connector
Analog RGB connector
DVI-D connector
RS touch panel connector
AC power supply terminals
7
Ver.1.00
Touch Panel
This equipment has a touch panel that enables keyboard-less, mouse-less operations by communication with the host computer using the RS232C cable.
Touch panel
ME NU
Host PC
CPU
-
+
ESC
P OWE R
Touch panel controller
Communication controller
INT
Touch panel
CPU
Serial
communication
Data input at the touch panel is processed by the touch panel controller and passed to the host PC via the serial port on the CPU in the controller.
Before the touch panel can be used, touch panel driver software must be installed. Note that the driver software is not bundled with this product.
Purchase the one separately or download it from the CONTEC's web site.
For further details, refer to the READ_ME file for each driver.
<Option touch panel driver>
Windows XP/2000/NT 4.0/98SE/95OSR2 : IPC-SLIB-01
MS-DOS 6.2
: IPC-TPB1-DRV
-
The USB touch panel driver software requires V1.40 or later of IPC-SLIB-01.
The USB connection can only be used on Windows XP, 2000, or 98SE. Connect via the RS-232C interface if using a different OS.
Use either USB or RS-232C for connecting the touch panel. The touch panel cannot be connected via both interfaces at the same time.
When using the USB connection, the screen image may disappear momentarily when the USB cable is connected or disconnected and when the
computer power is turned ON or OFF.
IPC-DT/61 Series
8
Ver.1.00
Hardware Setup
To maintain the ambient temperature within the installation environment requirement range, provide a gap of 30mm or more between the main unit
and any adjacent equipment.
Side view
Panel
30mm or more(above)
Bottom view
30mm or more(Side)
Interface surface
30mm or more
(Bottom)
CAUTI ON!
D o n' t con n ec t 1 an d 2 of
12 V D C -IN s im ul ta ne o usl y.
1 2 V D C -IN* 1* 2** *
* ** *** *** ** *
Panel
30mm or more(back)
Cut the display mount panel in the following dimensions. The four corners of the solid-line rectangle define the panel cut dimensions.
199 +1
-0
303 +1
-0
Panel thickness range: 1.6 to 7mm
[mm]
292 +1
-0
243 +1
-0
155 +1
-0
R1 or less
Panel thicknes range: 1.6 to 7mm
[mm]
358 +1
-0
227 +1
-0
289 +1
-0
R1 or less
Panel thickness range: 1.6 - 7mm [mm]
Panel thickness range: 1.6 to 7mm
[mm]
The specification, color, and design of a product may be changed without a preliminary announcement.
IPC-DT/61 Series
9