Download user`s manual

The following pop-up screen confirms that the step
has been made. You may either take a shot and go
back to the last menu (to make one shot per step
loop work easier) or go back to previous menu without triggering a shot.
The following screen confirms reaching the position
of previous step:
Using Go To mode
Storing position in memory
The DitoGear™ OmniSlider is featured with 5 persistent memory banks allowing storage of five different
positions of the trolley and recalling them easily.
In order to store a position in one of memory banks
do the following:
1
Make sure you are in the main screen of the
Go To mode listing available banks.
2
Move the trolley to the desired position
3
Select a bank of your choice and select
Store Position from the pop-up menu.
Accessing Go To mode
To access Go To mode, navigate to:
Home » Go To
Moving to the last position
It is also possible to get back to the previous position in case you need to redo the shot.
To do so, select
Home » Stop motion » Back to last shot
32
The following screen appears showing available
memory banks with stored positions as well as the
current position of the trolley.
The following screen confirms that the position has
been stored.
33