Download User Manual

Transcript
V 1
P R O F E S S I O N A L
2 0 1 0
Display Options
Resolution and Monitor options appear on this page.
Resolution
The V1 will automatically choose the interface aspect ratio most appropriate for your
system when you set this to Automatic. You may override this, however, and choose
either wide-screen (1280x768 or 1280x800) or standard screen (1024x768).
Full-screen mode
By default, this option is enabled, and forces your desktop resolution to either
1024x768 or 1280x768. In this mode, the V1 occupies your entire display. Use this
mode on “dedicated” analysis machines. You may not want to use this mode on
certain laptop PCs which are unable to properly switch to one of these display modes
(you may see a large black border around the V1 window).
The V1 will not operate in full-screen mode if your system is set to use anything other
than the Normal (also called “small”) font size on your Windows® Display Properties
control panel. Measured in dots per inch (DPI), the normal font size is 96 DPI. At
120 DPI (125% of normal size), the font size setting is sometimes referred to as “large
fonts.” International versions of Windows® may have default font sizes other than 96
DPI. In this case, full-screen mode will be unavailable.
The V1’s normal window size is 1024x768 or 1280x768 pixels, but increases with your
system’s font size setting. For example, the V1’s window size increases proportionally
to 1280x960 or 1600x960 when using large fonts (125% of normal size). In this case,
therefore, a desktop resolution of at least 1280x1024 pixels is required in order to view
the entire V1 window. If you wish to attempt to override this behavior and force an
1024x768 or 1280x768 size window, remove the check from the adjust display sizes
according to system font height box.
Second-Monitor Tool-less Display
Check Use second monitor for tool-less video display
if you have a system with two
monitors and you’d like to have the V1’s video window displayed on your second
monitor without the tools (the V1’s buttons). This feature has several requirements as
follows:
84