Download Performax

4.
Press the Value key to
change the Lines/inch to 8
lines.
GI Forms Control
Lines/Inch
8
4-6
5.
Press the Enter key to save
the new Lines/Inch value.
The bell will sound once.
6.
Press the Setup key to exit
setup mode. The “Save
Profile” message will be
displayed.
G1 FormsSave
Control
Profile?
Lines/Inch
Y=Enter N=Setup
8
7.
Press the Enter key. This
records the change into the
profile.
Profile
One
G1P1
Forms
Control
Font
DP10
Lines/Inch
8.
Press the On Line key to
place the printer back on
line.
G1P1
Forms
Control
Profile
One
Lines/Inch
Font
DP10
8
9.
Press the Load/Park key to reset top of form.
G1 Forms Control
Lines/Inch
8
8
After pressing the On Line key, the printer will operate with the vertical motion defined as 8 lines
per inch. The next time this profile is selected, or if the printer power is switched off and back on,
the lines per inch margin will remain at 8 lines per inch.