Download 2 - CNET Content Solutions

General Information
Power Off mode
3
If the machine is in Deep Sleep mode for 1 hour, it enters Power Off mode automatically. Power Off mode is
the lowest power consumption mode, which achieves a power consumption of less than 0.28 W. To start
printing, hold
key on the control panel until all the LEDs light up. Then send the print data.
You can enable the Power Off mode feature manually by following these steps:
a
b
Make sure that the top cover is closed and the power cord is plugged in.
c
Hold down
key for about 2 seconds.
All the LEDs turn off when you enable the Power Off mode.
3
Turn on the machine and wait until the machine is in the Ready mode.
NOTE
You can change the Power Off mode setting through the Remote Printer Console. For more information
on the Remote Printer Console, see Remote Printer Console (Windows® only) on page 36.
45