Download ChartScan/1400 User`s Manual

(1)
Look at the channel selection box to ensure that the desired channel is shown. If not, select the
desired channel.
In the above figure, chart 2 is displaying two channels. However, since “CH2” can be seen in
the channel selection box it is the currently selected channel. If desired, we could select the
other channel from the selection box at this point.
Note: Compressed ChartView windows will not show 100% of the window’s features. If you
do not see channel selection boxes in the ChartView main window, simply use the mouse
to expand the window until the channel selection boxes become visible; or “zoom” the
desired chart to make it occupy the full window.
(2)
Right-click on the chart’s display region. In this example we are using chart 2. The pop-up
menu appears.
(3)
In the pop-up menu select “Edit current channel.” The Chart Display Configuration Setup
dialog box will appear with the selected channel ready for reconfiguration (following figure).
Chart Display Configuration Setup
CV-10
ChartView
988992
Software Reference