Download Summing/Distributing Digital Audio Matrix

Select Setup / Port from the application menu and configure the PC port to be used in the
Communications section:
E@sy units have a node number that identifies them when they are on a network. In the Range
section, configure between what numbers you want the equipment search to be performed. Once this
range is adjusted, leds will be fixed in green color:
Once the previous steps have been completed, the following will be displayed when the equipment is
connected to the bus and turned on:
In this case, there is one IMPACT connected to the server PC, identified by node 001; as of this
moment, remote control is possible .
This server program is resident while the IMPACT is being controlled.
To activate the task planner that will allow crosspoints to be activated or deactivated according to a
time schedule, it is necessary to activate the Setup/Schedule option and close the program. When the
application is started up again, this option will have been activated.
IMPACT
SUMMING/DISTRIBUTING DIGITAL AUDIO MATRIX
13