Download PHOS shift user manual

Configuring the electronics, turning on/off FEE cards
First, you must check FEE servers by did (see page 15) and program RCUs (page 22).
To start the phosgui, log in as user phs on Linux machine alidcscom075.
This is set up by ssh keys from aldaqacr48 and aldaqacr49. Just do
> ssh phs@alidcscom075
No password has to be given.
At alidcscom075, go to the directory /home/phs/phos_dcs/bin and start the gui:
>cd phos_dcs/bin
>.startgui.sh
The following window should appear – phosgui:
Advice: Open the similar windows for all 3 PHOS modules.
5