Download - Anson Cameras

HD Network Camera User’s Manual
APPENDIX B PORT MAPPING
68
APPENDIX C REFERENCE FOR CLIENT SETTINGS
69
Electrical safety
70
The device is not designed for water-proof. Please take good measures for water-proof and thunder-proof when
using the device outdoor, or it may incur unpredictable serious damages; do not let any over flown water or other
liquid into the device so as to avoid short-current which may cause fire or electric shock.
Please install the lens, data line connecting this device, and then connect the power cable before installation.
Please properly do earth-grounding and take good measures for thunder-proof before connecting external cables
to the camera, avoiding any static electricity that can damage the internal main board.
When connecting the alarm signal cable, please confirm that the camera can only access weak electricity (switch)
signal. Or the camera parts may be damaged.
Please make sure that the power voltage setting is adjusted to the standard voltage value used by user’ s
country/region. If the user cannot be sure of the voltage in his/her area, please consult the user’ s local electricity
company. The mismatched power may cause short-current or damage the device.
If the power is damaged, please ask professional technicians or dealers for help.
Please stay away from generators with strong electromagnetic radiation, e.g. radio, TV, and electricity generator,
etc. avoiding any interference.
APPENDIX D PRODUCT SPECIFICATION
Safety Instruction
Operational safety
Please read the information provided by this manual carefully before you power on the device.
Due to the unpredictable reasons, e.g. transportation, the hardware inside the camera may be damaged. Please
check if the device as a whole is damaged seriously before you install the product; if the problem is any critical
defect that you cannot solve, please contact your dealer as soon as possible.
Please plug in and remove any cable or SD card while the power is on.
01