Download ControlLogix Operations Manual

74
ControlLogix™ Analog HART Modules
Table 7.2(Packet 1)
Tag Name
(If8h0 or Of8h0)Packet11
Style
Data Type
Packet1[8,1] NA
(If8h0 or Of8h0)Packet1[X,0] 1,2
(If8h0 or Of8h0)Packet1[X,0].HartChannelID
Packet1
INT
NA
BIN
(If8h0 or Of8h0)Packet1[X,0].HartCommStatus
SINT
BIN
(If8h0 or Of8h0)Packet1[X,0].HartDevStatus
SINT
BIN
(If8h0
(If8h0
(If8h0
(If8h0
(If8h0
(If8h0
(If8h0
(If8h0
(If8h0
(If8h0
(If8h0
(If8h0
(If8h0
REAL
REAL
REAL
REAL
SINT
SINT
SINT
SINT
SINT
SINT
SINT
SINT
REAL
FLOAT
FLOAT
FLOAT
FLOAT
DEC
DEC
DEC
DEC
DEC
DEC
DEC
DEC
FLOAT
or Of8h0)Packet1[X,0].HartPV
or Of8h0)Packet1[X,0].HartSV
or Of8h0)Packet1[X,0].HartTV
or Of8h0)Packet1[X,0].HartFV
or Of8h0)Packet1[X,0].HartPVUnits
or Of8h0)Packet1[X,0].HartSVUnits
or Of8h0)Packet1[X,0].HartTVUnits
or Of8h0)Packet1[X,0].HartFVUnits
or Of8h0)Packet1[X,0].PV_Assignment
or Of8h0)Packet1[X,0].SV_Assignment
or Of8h0)Packet1[X,0].TV_Assignment
or Of8h0)Packet1[X,0].FV_Assignment
or Of8h0)Packet1[X,0].RangeLow
(If8h0 or Of8h0)Packet1[X,0].RangeHi
REAL
(If8h0 or Of8h0)Packet1[X,0].Pad
SINT[4]
Description
Two dimensional array containing
packet 1 data for all 8 channels.
Packet 1 data for channel X
Bits 0 to 3: Channel number (0 – 7).
Bit 4: Searching/Initializing HART device
Bit 5: HART communication failure or
device not found
Bit 6: Pass-through message pending
(ready)
Bit 7: Unused (0)
Bits 8 to 10: Packet ID
Bit 11 through 15: Unused
HART communication stat us byt e. Refer to
appendix D for more details.
HART device status byt e. Refer to appendix D
for more details.
HART Primary Variable
HART Secondary Variable
HART T ertiary Variable
HART Fourt h Variable
HART Primary Variable units code
HART Secondary Variable units code
HART T ertiary Variable unit s code
HART Fourt h Variable unit s code
HART Primary Variable code
HART Secondary Variable code
HART T ertiary Variable code
HART Fourt h Variable code
Low transmitter range for analog signal in
engineering units
FLOAT High transmitter range for analog signal in
engineering units
Packet pad (32 bit alignment )
DEC
1
The name in parentheses represents the module tag name (i.e. If8h0 or Of 8h0) depending on w hich module is being used.
2
X represents the module channel number (0 to 7)