Download SERVICE MANUAL nx300
Transcript
SERVICE MANUAL nx300 WEB ACCESS: http://www.yorkville.com WORLD HEADQUARTERS CANADA U.S.A. Yorkville Sound Yorkville Sound Inc. 550 Granite Court Pickering, Ontario L1W-3Y8 CANADA 4625 Witmer Industrial Estate Niagara Falls, New York 14305 USA Voice: (905) 837-8481 Fax: (905) 837-8746 Voice: (716) 297-2920 Fax: (716) 297-3689 Quality and Innovation Since 1963 Printed in Canada Manual-Service-nx300-1v10.pdf IMPORTANT SAFETY INSTRUCTIONS INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS INSTRUCTIONS RELATIVES AU RISQUE DE FEU, CHOC ÉLECTRIQUE, OU BLESSURES AUX PERSONNES CAUTION: AVIS: AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE, N’ENLEVEZ PAS LE COUVERT (OU LE PANNEAU ARRIERE) TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. NE CONTIENT AUCUNE PIECE REPARABLE PAR L’UTILISATEUR. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CONSULTEZ UN TECHNICIEN QUALIFIE POUR L’ENTRETIENT Read Instructions Veuillez Lire le Manuel Packaging Emballage Warning Attention: The Owner’s Manualshould be read and understood before operation of your unit. Please, save these instructions for future reference. Keep the box and packaging materials, in case the unit needs to be returned for service. Conservez la boite au cas ou l’appareil devait être retourner pour réparation. When using electric products, basic precautions should always be followed, including the following: Lors de l’utilisation de produits électrique, assurezvous d’adhérer à des précautions de bases incluant celle qui suivent: Power Sources Your unit should be connected to a power source only of the voltage specified in the owners manual or as marked on the unit. This unit has a polarized plug. Do not use with an extension cord or receptacle unless the plug can be fully inserted. Precautions should be taken so that the grounding scheme on the unit is not defeated. Hazards Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be placed on the apparatus. Terminals marked with the “lightning bolt” are hazardous live; the external wiring connected to these terminals require installation by an instructed person or the use of ready made leads or cords. No naked flame sources, such as lighted candles, should be placed on the apparatus. The unit should be serviced only by qualified service personnel. L’appareil ne doit être branché qu’à une source d’alimentation correspondant au voltage spécifié dans le manuel ou tel qu’indiqué sur l’appareil. Cet appareil est équipé d’une prise d’alimentation polarisée. Ne pas utiliser cet appareil avec un cordon de raccordement à moins qu’il soit possible d’insérer complètement les trois lames. Des précautions doivent êtres prises afin d’eviter que le système de mise à la terre de l’appareil ne soit désengagé. Risque Ne pas placer cet appareil sur un chariot, un support, un trépied ou une table instables. L’appareil pourrait tomber et blesser quelqu’un ou subir des dommages importants. Utiliser seulement un chariot, un support, un trépied ou une table recommandés par le fabricant ou vendus avec le produit. Suivre les instructions du fabricant pour installer l’appareil et utiliser les accessoires recommandés par le fabricant. Il convient de ne pas placer sur l’appareil de sources de flammes nues, telles que des bougies allumées. Assurez que lappareil est fourni de la propre ventilation. The AC supply cord should be routed so that it is unlikely that it will be damaged. If the AC supply cord is damaged DO NOT OPERATE THE UNIT. Service Alimentation L’appeil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures et qu’aucun objet rempli de liquide tel que des vases ne doit être placé sur l’appareil. Ensure that proper ventilation is provided around the appliance. Power Cord Il contient des informations qui devraient êtres comprises avant l’opération de votre appareil. Conservez S.V.P. ces instructions pour consultations ultérieures. Les dispositifs marqués d’une symbole “d’éclair” sont des parties dangereuses au toucher et que les câblages extérieurs connectés à ces dispositifs de connection extérieure doivent être effectivés par un opérateur formé ou en utilisant des cordons déjà préparés. Cordon d’Alimentation Évitez d’endommager le cordon d’alimentation. N’UTILISEZ PAS L’APPAREIL si le cordon d’alimentation est endommagé. Service Consultez un technicien qualifié pour l’entretien de votre appareil. safety-4v3.eps • Oct. 26/05 nx300 YS No. 5949 5867 3780 3878 8483 8538 3478 3489 3924 3628 8509 3451 8933 8508T 8239D 3641 3644 3538 3549 3558 3668 3903 8701 8934 4599 4700 5013 9041 8729 8798 8874 8843 8786 8751 8935 8903 8995 3744 SPK7457 8908 8489 8492 8996 Description _3U3 140AC 10%CAP BLK RAD POLYP FLM _15U 160AC 10%CAP BLK RAD POLYP FLM _220UH COIL 22AWG R000 BOBBIN 1000UH COIL 18AWG R000 IRNLCORE ADAPTOR,SPEAKER STAND,METAL,BLACK RUBBER BUMPER W/ WASHER 1.375X1.375 CLIP 205/187X032 18-22AWG DISCO/INS CLIP 250X032 18-22AWG DISCO/INSL 1/4" JCK PCB MT VERT 2XTIP HICURNT SPKON 4C PCB MT VERT 250TAB GRY #4 BLACK BLANK XOVERDISH PLASTIC CNFG1 EYELET SMALL 0.089 OD PLATED 1/4-20 INSIDE 7/16-20 UNF FLATALLEN LARGE DISH ALUMINIZED DECAL "Y" LOGO SML. DOMED YORKVILLE WHT. S.C BAYONET WIRE SOCKET TINNED 12V 24W SC BAYONET #1156 BULB 24 PIN BREAKAWAY LOCK .156 TRIFURCON TERM .156 TERM HOUSING 4 CIR .156/RAMP 4 CIR CHASSIS MOUNT HDR .156 PCB CONN 4 CIR BOTTOM .156 4-40 KEPS NUT ZINC 7/16-20 UNF HEX NUT GRD 5 CLEAR ZNC 22AWG SOLID SC WIR T&R JMP 10.W 8R2 5% BLK RES 15.W 22R 5% BLK RES .093" HOLE .156" STAG 16GA 36"X120" #4 X 3/8 FLAT QUAD TYPE A JS500 BLK 4-40 X 1.00 PAN PH MS ZINC 8-32 X 1" PAN PHIL TAPTITE JS500 10-32 X 1 1/8 FLAT PH MS JS500 10-32 X 1 1/4 PAN QD MS JS500 BLACK 10-32 X 2 PAN PH MS JS500 1/4-20 X 23MM JOINT CON. BOLT B/O M5 X 16 DIN 7985 HHZINC SCREW 3/8" STEEL FLAT WASHER,ZINC CLEAR SNAP IN .375 SPACER RICHCO 15" 8R 300WPGM SPEAKER #10 SAE FLAT WASHER .25"ID .565" OD 1/4-20 SPLIT WASHER ZINC 7/16" SPLIT LOCK WASHER CLEAR ZINC 3/8" SPLIT WASHER Qty. 1 1 1 1 1 3 2 2 2 2 1 2 5 1 1 2 2 0.167 4 1 1 2 2 5 2 4 1 4 4 2 4 16 20 3 4 2 5 4 1 14 14 5 5 YS No. Description Qty. B A C D E F G H I J K M1285.PCB_DATABASE_HISTORY MODEL(S):- NX300 # DATE VER# DESCRIPTION OF CHANGE 1 JAN-03-2006 1.00 FIRST RELEASE 2 D V N 3 D N V 4 D V N 5 D V N 6 D N V 7 D N V 8 D N V 9 D N V N 10 D V 11 D N V 12 D N V N V 13 D 1 #1156 Bulb #1156 Bulb 3644 3644 B1 B2 2 LITE1 3641 Bayonet Bulb Socket 1/4in JCK J1 SLEEVE LITE2 3641 Bayonet Bulb Socket R6 18.W 3924 2 Yorkville Sound 22R . 3 C2 1000UH 3878 L1 1 +20 +20 +10 +10 3 140V 3U3 +0 +0 -10 -10 1/4in JCK J2 SLEEVE d B V 3924 d B V -20 -20 -30 -30 -40 -40 4 4 J4:A 250V C1 SPEAKON 4C 3628 -50 20 15U 1+ 1_ #7457 15" 8R 300W PGM 2+ 3628 SPEAKON 4C 200 500 1k 2k 5k 10k 20k -50 220UH SP1 #7454 8R 40W 1" DRIVER HORN 3780 5 10.W . R9 R8 8R2 8R2 10.W R7 8R2 . 10.W . SPEAKON 4C 3628 10.W R1 8R2 J3:A 6 L2 WOOFER J4:B 100 Hz SP2 2_ 5 50 6 1+ 2_ 1_ 2+ 3628 SPEAKON 4C J3:B 7 7 Product NX300 PCB# M1285 8 Date: Wed Jan 18, 2006 Filename: m1285-1V00.sch2002 A B C D E F G H I J Sheet 1 of 2 Rev: V1.00 K 8 SOCKET SOCKET UPSIDE DOWN NL4MP-1 1/2 2+ 22- 1- 2- 1- 2- 1- 1+ 1+ SPEAKON 4C 1+ SPEAKON 4C 1+ J3 NX300 v1.00 2+ 2+ 1- M1285 NL4MP-1 3628 2+ W5 NX300 NORMAL # DATE VER# DESCRIPTION OF CHANGE FIRST RELEASE 1 JAN-03-2006 1.00 V N 2 D NORMAL LARGE N V 3 D V N 4 D D V N SOCKET WITH DIRECTION 5 N V 6 D V N 7 D D V N 8 TAB N V 9 D V N 10 D V N 11 D N V 12 D V N 13 D 3628 3644 #1156 Bulb Ba yo ne t Bu lb So cke t W4 11 36 41 LIT E2 5013 # 1 2 3 4 5 6 DATE D D D D D D NX300 VER# DESCRIPTION OF CHANGE V N V N V N V N V N V N MODEL(S):# 1 2 3 4 5 6 PC# PC PC PC PC PC PC NX300 PENDING CHANGE X X X X X X 22R 18.W *PLACE IMPLEMENTED CHANGES INTO BOARD HISTORY Bu lb LIT E1 So cke t B1 36 41 RED 1 RT V Ba yo ne t 3644 #1156 Bulb 1 J2 J1 BLK SLEEVE BLACK TIP1 3924 TIP1 3924 3 W1 2 3903 1 PCB CONN 4 CIR BOTTOM .156 4 SLEEVE TIP2 TIP2 C2 RT V C1 RT V 15U 250V W3 NX300 v1.00 RT V OUTSIDE WIRE 5867 220UH 22AWG 3780 RT V RT V L2 3U3 140V 5949 L1 0R000 1000UH RT V RT V 4700 RT V W2 RT V RT V IRON-L Inductor 2 3903 3 PCB CONN 4 CIR BOTTOM .156 4700 RT V 8R2 10.W 8R2 10.W 8R2 10.W 8R2 10.W R8 4700 R9 INSIDE WIRE 1 4700 R7 SHORT AXIS R1 4 SEE NOTE 3 CLINCH ORIGIN INSERT VCD ORIGIN LONG AXIS Pcb Mech M1285 Top Assy M1285 v1.00 v1.00 ETCH GUIDE StepAndRepeat - [email protected]@0.000 PRODUCTION NOTES 1. MOUNT L1 WITH 8798 #4 SCREW AND 8701 LOCK NUT. SCREW HEAD MUST BE ON COPPER SIDE OF BOARD. 2. USE M15.525X13.85 BAREBOARD EVEN THOUGH DIMENSION IS 15.500 - SHOULDN'T MATTER SINCE NO VCD 3. LEAVE SPACE BETWEEN R1, R7, R8 AND R9 RT V 3538 H+ H- W- W+ M1285 2/2 YELLOW NOTE: CONNECT YELLOW WIRE TO "HORN+" (YELLOW WIRE IS GROUND, HORN IS OUT OF PHASE) BlankSize - 15550x13850 R6 M1285 PENDING CHANGES M1285 DRILLING HISTORY MODEL(S):- B2 J4 M1285.PCB_DATABASE_HISTORY MODEL(S):-