Download AN706-00038-2v0-E

Transcript
AN706-00038-2v0-E
3 OVERVIEW OF THE WIRELESS SYSTEM BOARD
The wireless system board has two demo operation modes as follows.
① Sensor Logger Mode
The slave devices read the measurement values from the hygro-thermometer and
illumination sensor and send them to the host device by wireless communication.
Communication is possible with up to 4 slave devices for each host device.
(Communication is possible with up to a maximum of 15 devices by expanding the
system)
The host device sends the data received from the slave devices to a PC via UART.
② Remote Control Mode
The slave devices read the measurement value of the accelerometer at an interval of
200 milliseconds, and send the value to the host device by wireless communication.
Communication is between one slave device for each host device.
The host device sends the data received from the slave device to a PC via UART.
Built-in LCD and Sensor
Sensor control
Slave 1
Slave 2
950MHz
LCD control
Wireless
communication
Sensor measurement
value display
Host
RS232C
communication
Slave 3
Figure 1 System overview diagram
8