Download AN706-00038-2v0-E
Transcript
AN706-00038-2v0-E 3 OVERVIEW OF THE WIRELESS SYSTEM BOARD The wireless system board has two demo operation modes as follows. ① Sensor Logger Mode The slave devices read the measurement values from the hygro-thermometer and illumination sensor and send them to the host device by wireless communication. Communication is possible with up to 4 slave devices for each host device. (Communication is possible with up to a maximum of 15 devices by expanding the system) The host device sends the data received from the slave devices to a PC via UART. ② Remote Control Mode The slave devices read the measurement value of the accelerometer at an interval of 200 milliseconds, and send the value to the host device by wireless communication. Communication is between one slave device for each host device. The host device sends the data received from the slave device to a PC via UART. Built-in LCD and Sensor Sensor control Slave 1 Slave 2 950MHz LCD control Wireless communication Sensor measurement value display Host RS232C communication Slave 3 Figure 1 System overview diagram 8