Download LG 330 Manual
Transcript
C aller I.D. This feature enables the phone number of the calling person to be displayed when you receive the call. You should check if the cellular service carrier provides this feature. Use of Caller I.D. The phone number of the calling person will be displayed on the LCD screen when the call is received. The ‘Number is Restricted’ message will be displayed if the phone blocks displaying the calling person’s phone number. In addition, the ‘Number is Unavailable’ message will be displayed in case the Caller I.D. cannot be used. The ‘Missed Call’ message will be displayed when you fail to receive the call after power on or fail to answer. Missed call number will be stored in the call history temporarily and will be displayed later in case the phone number is not blocked. Stored Phone Numbers with Names In case the phone number is stored in the memory together with the name, the phone number of the calling person and name is displayed on the screen before you answer. Radio Frequency (RF) Energy Your LGC-320/330W telephone is a radio transmitter and receiver. When it is on, it receives and also sends out radio frequency (RF) energy. The phone operates in the frequency range of 824 MHz to 894 MHz. When you use your phone, the system handling your call controls the power level at which your phone transmits. The power level can range from 0.006 watts to 0.6 watts. The design of the LGC-320/330W phone complies with the most recently updated American National Standards Institute (ANSI) for safety levels with respect to human exposure to RF energy. Experts from science, engineering, medicine, government health agencies, and industry developed the updated standard. This standard was adopted in March, 1993, by the U.S. Federal Communications Commission (FCC). However, if you wish to limit RF exposure further than the current ANSI Standard, you may choose to control or limit the duration of your calls and operate your phone in the most efficient manner.