Download PDF - Lenovo Press

Enabling multicast
Multicasting is enabled by default; however, as mentioned earlier the default DOS
Managed PXE boot image supports only unicasting. If you have not changed the
DOS Managed boot image to use the actual network adapter device drivers,
unicast will be the method used.
Follow the steps below to configure the default DOS Managed PXE boot image:
1. Open the Deployment Console.
2. Click Tools → PXE Configuration. This opens the PXE Configuration utility
shown in Figure 6-10.
Figure 6-10 The PXE Configuration utility’s main window
3. Select DOS Managed in the Boot Menu Options for PXE Server section. Click
Edit to open the Edit Shared Menu Option window for the DOS Managed boot
image.
Chapter 6. Using image-based deployment
183