Download 3-Space Sensor Data-Logging User`s Manual

Transcript
User's Manual
4.4.5 Raw Data Commands
Command
Description
64(0x40)
Get all raw component
sensor data
65(0x41)
Get raw gyroscope rate
66(0x42)
Get raw accelerometer
data
67(0x43)
Get raw compass data
Return
Data
Data Len Return Data Details
Len Data Details
Gyro Rate in counts per
Returns the raw gyro rate vector, accelerometer
degrees/sec (Vector x3),
vector and compass vector as read directly from the
Acceleration Vector in
component sensors without any additional postcounts per g (Vector x3),
processing. The range of values is dependent on the
Compass Vector in counts
currently selected range for each respective sensor.
36
0
per gauss (Vector x3)
Returns the raw gyro rate vector as read directly
from the gyroscope without any additional postGyro Rate in counts per
processing.
12
degrees/sec (Vector x3)
0
Returns the raw acceleration vector as read directly
from the accelerometer without any additional postAcceleration Vector in
processing.
12
counts per g (Vector x3)
0
Returns the raw compass vector as read directly
Compass Vector in counts
from the compass without any additional post12
per gauss (Vector x3)
0
processing.
Long Description
4.4.6 Data-Logging Commands
Command
59(0x3B)
60(0x3C)
61(0x3D)
62(0x3E)
63(0x3F)
Description
Format and Initialize SD
Card
Return
Data Len Return Data Details
Long Description
Erases the contents of the SD card.
Initiates a data logging section with the specified
attributes as indicated in the provided data logging
Begin data logging session configuration file.
End data logging session Terminates the ongoing data logging session
Set clock values
Get clock values
0
0
0
0
0
0
Sets the current time on the onboard real-time clock.
Returns the current time as read by the onboard
real-time clock.
31
Data
Len Data Details
6
6
Month (Byte), Day (Byte),
Year (Byte), Hour (Byte),
Minute (Byte), Second
(Byte)
0
Month (Byte), Day (Byte),
Year (Byte), Hour (Byte),
Minute (Byte), Second (Byte)