Download 3-Space Sensor Data-Logging User`s Manual
Transcript
User's Manual 4.4.5 Raw Data Commands Command Description 64(0x40) Get all raw component sensor data 65(0x41) Get raw gyroscope rate 66(0x42) Get raw accelerometer data 67(0x43) Get raw compass data Return Data Data Len Return Data Details Len Data Details Gyro Rate in counts per Returns the raw gyro rate vector, accelerometer degrees/sec (Vector x3), vector and compass vector as read directly from the Acceleration Vector in component sensors without any additional postcounts per g (Vector x3), processing. The range of values is dependent on the Compass Vector in counts currently selected range for each respective sensor. 36 0 per gauss (Vector x3) Returns the raw gyro rate vector as read directly from the gyroscope without any additional postGyro Rate in counts per processing. 12 degrees/sec (Vector x3) 0 Returns the raw acceleration vector as read directly from the accelerometer without any additional postAcceleration Vector in processing. 12 counts per g (Vector x3) 0 Returns the raw compass vector as read directly Compass Vector in counts from the compass without any additional post12 per gauss (Vector x3) 0 processing. Long Description 4.4.6 Data-Logging Commands Command 59(0x3B) 60(0x3C) 61(0x3D) 62(0x3E) 63(0x3F) Description Format and Initialize SD Card Return Data Len Return Data Details Long Description Erases the contents of the SD card. Initiates a data logging section with the specified attributes as indicated in the provided data logging Begin data logging session configuration file. End data logging session Terminates the ongoing data logging session Set clock values Get clock values 0 0 0 0 0 0 Sets the current time on the onboard real-time clock. Returns the current time as read by the onboard real-time clock. 31 Data Len Data Details 6 6 Month (Byte), Day (Byte), Year (Byte), Hour (Byte), Minute (Byte), Second (Byte) 0 Month (Byte), Day (Byte), Year (Byte), Hour (Byte), Minute (Byte), Second (Byte)