Download Wireless Sensor System User Manual

Main Menu – WSG-101,
101, 2.4GHz
When any key is pressed the system menu will appear as shown below. The system menu also provides
an indication of the Communication Channel, Network ID, and the number of dev
devices
ices configured to the
gateway.
To continue, enter the number shown on the left side of the screen for the desired command.
Note – The wired network parameters are not configured through this menu. See the following manual
for configuring the wired BASS interface (e.g. BACnet, Modbus, LonWorks)
http://www.powercastsensors.com/files/
http://www.powercastsensors.com/files/WSG-NetworkConfigurationGuide.pdf
The file is also found on the following page:
http://www.powercastsensors.com/support/
Rev B.3 – 2013/02
WSN User’s Manual
www.PowercastSensors.com
Page 6