Download User manual

5. S ERVICE AND MAINTENANCE
The Mania SCX600/700 requires simple routine maintenance. The
maintenance schedule depends heavily on the operating environment;
please consult a Martin service technician for recommendations.
Any service procedure not described here should be referred to a qualified
technician.
Warning!
Disconnect the fixture from power and allow it to cool for at
least 20 minutes before removing any cover.
Wear safety glasses and gloves and allow the fixture to cool
for at least 20 minutes before removing the lamp.
Important! Excessive dust, grease, and smoke fluid buildup degrades
performance and causes overheating and damage to the
fixture that is not covered by the warranty. Check and, if
necessary, clean fixtures at regular intervals.
SCX600 lamp
The Mania SCX600 uses a 24 V, 250 W halogen lamp with integral
reflector.
Important! Use only this type of lamp. See “Accessories” on page 47 for
details of replacement lamps. Installing any other lamp may
damage the fixture.
Replacing the lamp
1. Disconnect the fixture from power and allow it to cool for at least 20
minutes.
24
Mania SCX600/700 user manual