Download manual - Snooper Services

7.0 Quick Access Menu
A small on-screen Menu can be launched by touching the screen anywhere
along the top 10mm of the display. (See diagram right).
The quick access menu will drop down automatically. If no other button on the
drop down box is pressed the drop down box disappears after approximately
three seconds
From this Menu you can:
• Zoom closer in, or zoom further out from the map.
• Mute or alter the audio level
icon you can manipulate the map
• By pressing the
• Switch between the 2D, 3D and North views.
• Switch between day and night settings
• Switch off the speed camera location facility.
7.1
Volume Setting
Selecting this option opens the Volume menu whereby you can increase or
decrease the audio level of the unit. To adjust the volume, use your finger to
press either the
button to increase the volume or the
button to decrease
the volume.
Please note that this new setting is only temporary and if the Strabo is switched off and then back on the audio
level returns to either the factory default or your personalised setting.
If you press the speaker icon
you can turn off the audio on the unit
completely. A symbol is displayed in the top left hand corner of the display to
indicate that the sound has been switched off. If Bluetooth is activated the
symbol is not visible.
To switch the sound back on press the screen near the top of the display and
select the
icon. Press either the speaker icon or the volume controls to
restore audio on the unit.
7.2
Scroll Map
By pressing this icon you can manipulate the map by touching and moving your finger on the screen
7.3
or
Day or Night Settings
Bright colours are normally used for the mapping display so that you can see the map more clearly, even in bright sunlight.
When it is dark outside however, you may want to switch to the Night Mode
as the daytime setting will be too bright.
The navigation view will then be displayed using dark and subdued colours that will not interfere with your night vision.
Use Day
to revert to the original colour scheme.
Please note: If you switch the unit off and then back on the display reverts to your previous personalised setting.
7.4
Camera Alerts (Only applicable if you have subscribed to the Enigma Camera Database)
This function allows you to temporarily disable the safety camera alerts. If you
press the camera icon
you can turn the camera alert on or off. A symbol is
displayed in the top right hand corner of the display to indicate that the alert has
been switched off.
To restore the camera alerts press the top of the Strabo’s display to show the
drop down menu and then press the camera icon.
Please note that if the unit is switched off and then switched back on the
camera alerts are automatically enabled.
39